Loosening the hanger from the steam rod | Professional Steamer

Do you have a Professional Steamer, or a MIDI steamer from STEAMRS and need some help with detaching the section of the clothes hanger from the rod? This requires some special technique. This is because the "hanger part" is "stuck" in the small hole shown in the picture below. So that it would not continuously unscrew and turn during steaming.

  1. Keep the side with the hanger part facing the ground.
  2. Hold up the other side of the pole (which is normally screwed into the steamer).
  3. Hold the top of the telescopic steam rod with your dominant hand, and the hanger part with your other hand.
  4. Pull in 2 opposite directions with only a little force.
  5. At the same time, rotate the hanger part little by little.
  6. At some point they will separate easily.

 

Previous post
steam pole MIDI Steamer garment steamer beige metal
STEAMRS MIDI garment steamer steam head beige color

Last but not least: zorg beter voor de kleding die je al hebt!

Gebruik de juiste verzorgingsartikelen om je kleding te verzorgen. Stop je kleding niet onnodig in de wasmachine, maar haal er bijvoorbeeld eens een kledingstomer overheen om de stof op te frissen, of hang de stof buiten uit om te luchten. Gaat een stof pillen? Of zitten er pluizen op? Gebruik een textielborstel of pluizenverwijderaar om de stof nieuw leven in te blazen. Het hoeft zeker niet weggegooid te worden. Gebruik zachtaardig wasmiddel, zonder chemicaliën en schadelijke stoffen voor je kledingstuk. Zo gaat de stof veel langer mee!